HOME & OFFICE SECURITY SERVICES
CCTV is a monitoring system that allows a business to record footage based on the system's programming. A closed circuit television, or CCTV, describes a system that captures and records video on a closed, connected system. This differs from broadcast television in that a CCTV system involves a direct cable or wireless connection between a camera, receiver and recording device, as opposed to a wireless signal publicly broadcast to multiple, properly attuned receivers. CCTV systems are used for surveillance purposes, to increase levels of safety and security.
Fire safety is the set of practices intended to reduce the destruction caused by fire. Fire safety measures include those that are intended to prevent ignition of an uncontrolled fire, and those that are used to limit the development and effects of a fire after it starts. Fire safety measures include those that are planned during the construction of a building or implemented in structures that are already standing, and those that are taught to occupants of the building.
A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations. Alarms can be either motorized bells or wall mountable sounders or horns. They can also be speaker strobes which sound an alarm, followed by a voice evacuation message which warns people inside the building not to use the elevators. Fire alarm sounders can be set to certain frequencies and different tones including low, medium and high, depending on the country and manufacturer of the device. Most fire alarm systems in Europe sound like a siren with alternating frequencies. Fire alarm sounders in the United States and Canada can be either continuous or set to different codes such as Code 3. Fire alarm warning devices can also be set to different volume levels. Smaller buildings may have the alarm set to a lower volume and larger buildings may have alarms set to a higher level.
A Fire Alarm Control Panel (FACP), or Fire Alarm Control Unit (FACU), is the controlling component of a Fire Alarm System. The panel receives information from environmental sensors designed to detect changes associated with fire, monitors their operational integrity and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated sensor, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems.
A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire department. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire.
The outstanding feature of Fire Extinguisher Ball The Fire Extinguisher Ball weights 1.3 Kg, round shape, throw towards the fire by your hand One unit can extinguish the fire within a space of 8 m3 and 2 units can extinguish the fire within 16 m3. The suppressing performs in a way of 360 degree directions. Its life span is 5 years. Moreover, the Fire Extinguishing Ball can extinguish 5A and 21B Class fires. When a fire occurred, The ball will self-activate in 3-10 seconds after flame contact and it bursts to spread the dry chemical in it automatically and makes an alarm noise as an alarm for 90-120 dB within safety international standards under the regulation of the Impulsive Noise. The Fire Extinguishing Ball is installed 1.5 meter or about 6 feet.over the risk area. For C* fire class, the Fire Extinguisher Ball shall be installed as a sentinel in a risk area which cannot be extinguish by water such as over an electric female plug.
A security alarm is a system designed to detect intrusion – unauthorized entry – into a building or area. Security alarms are used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders. Car alarms likewise protect vehicles and their contents. Prisons also use security systems for control of inmates. The intruder system comprises detectors, control panels and communications devices. Detectors identify and react to specific occurrences including movement, shock, vibration, smoke, heat, and flood. Different types of detectors are available, each protecting different aspects of the property. These include: • Passive infrared sensors (PIRs) detect people moving using infrared heat sensing, • Dual Technology sensors use combined infrared and microwave sensing technologies to help reduce false alarms, • Magnetic door contacts detect the opening and closing of doors and windows, • Glass break sensors listen for the specific noise of breaking glass, • Shock sensors detect attacks on doors and windows, • Smoke sensors can be connected to the intruder alarm system to detect fire.